Home About us Products Technical Info Samples Distribution News Contact Parametric Search
ImprintPrint page
Products:
SMD Capacitors
Capacitors in PCM 2.5 mm 
Capacitors in PCM 5 mm 
Film/Foil Capacitors in PCM 7.5 - 15 mm 
Metallized Capacitors in PCM 7.5 - 37.5 mm 
Pulse Capacitors 
RFI Capacitors 
Snubber Capacitors 
GTO Capacitors 
DC-Link Capacitors 
SuperCapacitors 

You are here: HomeProductsCapacitors in PCM 5 mmMKS 2 page 1

Overview

 

FKS 2

 

FKM 2

 

FKP 2

 

MKS 2

 

MKS 2-XL

 

MKM 2

 

MKP 2

 

MKI 2

 

PDF-File

 

 

Page 2
 
Metallized Polyester (PET) Capacitors in PCM 5 mm
 
Special Features
High volume/capacitance ratio
Self-healing
According to RoHS 2002/95/EC
Typical Applications
For general DC-applications e.g.
By-pass
Blocking
Coupling and decoupling
Timing
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Silver/White. Epoxy resin seal: Red
 
Electrical Data
Capacitance range:
1000 pF to 6.8 µF (E12-values on request)
Rated voltages:
16VDC, 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 630VDC
Capacitance tolerances:

±20%, ±10%, ±5%
Operating temperature range:
-55°C to +100°C
Test specifications:
In accordance with IEC 60384-2 and EN 130400
Climatic test category:
55/100/21 in accordance with IEC
Insulation resistance
at +20°C:
Test voltage: 1.6 Ur, 2 sec
Voltage derating:
A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 2 fit (0.5 x Ur and 40°C)

Graphs:

Soldering:
Ur Utest C < 0.33 µF 0.33 µF< C < 6.8 µF
16 VDC 10 V >3.75 x 103 M
(mean value: 1x104M)
> 1000 sec (Mx µF)
(mean value: 3000 sec
50 VDC 10 V >5 x 103 M
(mean value: 3x104M)
> 1000 sec (Mx µF)
(mean value: 3000 sec)
63 VDC 50 V >1 x 104 M
(mean value: 5x104M)
> 1250 sec (Mx µF)
(mean value: 3000 sec)
>100 VDC 100 V >1.5 x 104 M
(mean value: 1x105M)
> 3000 sec (Mx µF)
(mean value: 6000 sec)
Measuring time: 1 min.
Dissipation factors at +20°C: tan
at f C < 0.1 µF 0.1 µF< C < 1.0 µF C > 1.0 µF
1 kHz
10 kHz
100 kHz
< 8 x10-3
< 15 x10-3
<
30 x10-3
< 8 x10-3
< 15 x10-3
-
< 10 x10-3
-
-
Maximum pulse rise time: for pulses equal to the rated voltage
Capacitance
pF/µF
Pulse rise time V/µsec
max.operation/test
16VDC 50VDC 63VDC 100VDC 250VDC 400VDC 630VDC
1000 ...6800
0.01 ...0.022
0.033...0.068
0.1...0.47
0.68...1.0
1.5...3.3
4.7
6.8
-
-
-
-
-
-
4/40
3/30
-
-
-
10/100
8/80
8/80
5/50
3/30
-
35/350
20/200
15/150
12/120
7.5/75
5/50
3/30
-
35/350
25/250
20/200
15/150
10/100
-
-
-
50/500
50/500
50/500
25/250
-
-
-
-
80/800
80/800
80/800
-
-
-
-
110/1100
110/1100
90/900
-
-
-
-
-
     
Mechanical Tests   Packing
Pull test on leads:
10 N in direction of leads according to IEC 60068-2-21
Vibration:
6 hours at 10...2000 Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29
  Available taped and reeled.

Detailed taping information:


Example for ordering / Part number:
 

 

Page 2